CG Intensive garage retention

Ecological value
80%
Water storage
95%
Care and maintenance
80%
The intensive garage retention system design is an effective way of delaying rainwater runoff and adding it to the natural water cycle through evaporation. The green garage has a high, multi-layer structure that allows a diverse range of plants such as shrubs, trees and perennials etc. Combined with our drainage elements, which have superior water drainage capacity and withstand extremely high pressure, road surfaces, parking spaces, parkland and much more can be added to the garage roof. With the right plants, the garage doesn’t just look attractive but also offers a habitat for animals and insects.

Use ClimaGrün’s own configurator and solution finder to obtain an overview, detailed system planning and calculation of the costs in no time.

1
2
3
4
5

1Vegetation Lawn, shrubs and trees

2Intensive Substrate CG-IS light, Sub-substrate CG-US light

Intensive Substrate CG-IS light for intensive green roofs, as vegetation support layer for perennials, shrubs, woody plants and trees, with high-quality aggregates and low weight.

Sub-substrate CG-US light for higher build-up, as a filling substrate under intensive and lawn substrates, with high-quality aggregates and low weight.

3Filter fleece CG-FV 200

Filter fleece CG-FV 200 prevents fine particles from being washed into the drainage layer and guarantees high water permeability.

4Retention module CG-RM 150

Retention module CG-RM 150 for extensive and intensive green roofs, as well as the associated coverings, for temporary or permanent water storage with high retention volume.

5Protection & Storage Fleece CG-SSV 1000

Protection & Storage Fleece CG-SSV 1000 to protect the roof sealing with separating and water storage function.

Retaining element with restrictor CG-AED

Retaining element with restrictor CG-AED for object-specific adjustment of a defined restrictor discharge.

Inspection chamber CG-KS 40 h10

Inspection chamber CG-KS 40 h10 for use above roof drains on extensive and intensive roof areas with negative pressure roof outlet.

Chamber elevation 40 CG-KSE 10

Chamber elevation 40 CG-KSE 5 as extension element for the inspection chambers CG-KS 40 h5 / CG-KS 40 h10 (Item number: 201020 / 201030).

Technical info

Weight* approx. 890-1.030 kg/m²
System height approx. 76 cm
Roof pitch
Type of vegetation Lawn, shrubs, trees
Run-off rate Object-related adjustable
Retention volume approx. 140 l/m²
Water storage approx. 245-385 l/m²
* The material weight of the substrate varies locally; shrubs and trees are not taken into account
** According to the current FLL green roof guidelines, Önorm L 1131 & UNI 11235.

Extra products and add-ons

Tenders made easy

  • Protection & Storage Fleece CG-SSV 1000
    ClimaGruen protection & storage fleece CG-SSV 1.000 for the protection of the roof sealing with separation and water storage function and the following properties: Material PP (polypropylene) - recycled fibres, nominal thickness approx. 5,0 mm, weight approx. 1.000 g/m², water storage capacity approx. 4,0 l/m², static puncture resistance (EN ISO 12236) approx. 4.000 N, geotextile robustness class GRC 5, supply and lay professionally with 10 cm overlap.
  • Vertical protection mat
    Building protection mat CG-BSM 6, for the protection of waterproofing at the edge area, and install according to planning specifications.
  • Drainage element CG-D 150
    ClimaGruen retention module CG-RM 150 for extensive and intensive green roofs, as well as the associated coverings, for temporary or permanent water storage with high retention volume and the following properties: Material recycled polyolefin made of PP (polypropylene) - PE (polyethylene), nominal thickness approx. 150 mm, weight approx. 9,0 kg/m², void volume approx. 93 vol.%, retention volume approx. 140 l/m², compression strength (DIN EN ISO 25619-2) approx. 800 kN/m² at 5 % compression, supply and lay professionally.
  • Filter fleece CG-FV 200
    ClimaGruen Filter fleece CG-FV 200 prevents fines from being washed into the drainage layer and guarantees a high water permeability with the following properties: Material PP (polypropylene), nominal thickness approx. 1,9 mm, weight approx. 200 g/m², opening width O90 (EN ISO 12956) approx. 0,1 mm, static puncture resistance (EN ISO 12236) approx. 2.350 N, geotextile robustness class GRC 3, water permeability H50 (EN ISO 11058) approx. 115 l/m²s, supply and lay professionally with 10 cm overlap.
  • Sub-substrate CG-US light
    ClimaGruen Sub-substrate CG-US light, for higher build-up, as a filling substrate under intensive and lawn substrates, with high-quality aggregates and low weight, supply and install to the naturally compacted layer height of ____ cm. Material (main components) Brick chippings, lava, pumice, expanded clay, expanded shale, green waste compost, weight dry approx. 750 kg/m³, weight water-saturated approx. 1.300 kg/m³, max. water capacity ≥ 35 vol %, water permeability ≥ 40 mm/min, salt content ≤ 3,0 g/l, pH value 6,0 - 8,5, organic substances ≤ 50 g/l. The compaction factor is generally approx. 1,2, with pneumatic installation approx. 1,25.
  • Intensive Substrate CG-IS light
    ClimaGruen Intensive Substrate CG-IS light, for intensive green roofs, as vegetation support layer for perennials, shrubs, woody plants and trees, with high-quality aggregates and low weight, supply and install to the naturally compacted layer height of ____ cm. Material (main components) Brick chippings, lava, pumice, expanded clay, expanded shale Green waste compost, weight dry approx. 750 kg/m³, weight water-saturated approx. 1.300 kg/m³, max. water capacity ≥ 45 vol %, water permeability ≥ 30 mm/min, salt content ≤ 3,0 g/l, pH value 6,0 - 8,5, organic substances ≤ 90 g/l. The compaction factor is generally approx. 1,3, with pneumatic installation approx. 1,35.
  • Retaining element with restrictor CG-AED
    ClimaGruen retaining element CG-AED for object-specific setting of a defined restricton discharge with the following properties: Material retaining element stainless steel (1.4301), material retaining adapter PVC, height approx. 210 mm, outer diameter approx. 375 mm, drain pipe diameter approx. 110 mm, accumulation cylinder diameter approx. 110 mm, stepless variable height adjustment approx. 60 mm, drainage capacity approx. 6,2 l/s, object-specific restrictor holes, weight approx. 5,2 kg, supply and install professionally.
  • Inspection chamber CG-KS 40 h10
    ClimaGruen inspection chamber CG-KS 40 h10 for use above roof drains on extensive and intensive roof areas with pressure drainage, with the following features: Material PP (polypropylene, colour anthracite, dimensions 400 x 400 x 110 mm, weight approx. 1,9 kg, UV-resistant, manhole cover tread-resistant & closable, manhole base opening approx. 31 cm, supply and install professionally.
  • Chamber elevation 40 CG-KSE 10
    ClimaGruen chamber elevation 40 CG-KSE 10 as extension element for the inspection chambers CG-KS 40 h5 / CG-KS 40 h10, with the following features: Material PP (polypropylene), colour anthracite, dimensions approx. 400 x 400 x 100 mm, weight approx. 0,9 kg, UV-resistant, side wall with inlet slots 3 mm, with connection options for drainage pipes, reinforcement with base plate for raising the elements, supply and install professionally.

© ClimaGrün GmbH – Subject to change, typos and printing errors

Downloads

Projects

ClimaGrün solutions

Use ClimaGrün’s configurator to adapt your green roof to project requirements and find the right solutions.

Further system solutions

ClimaGrün - CG Intensive garage retention - Rating 5/5
5/5